Fresh air intake

Started by gadgetman, April 01, 2015, 04:22 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

gadgetman

Decided to put a fresh air intake on the coach so it dosent have to take in so much supper hot air.

Used plastic outside drain flex elbows and unions. Supper cheap stuff. One union collar on the end has a screen in it.

The air cleaner has 2 intakes and the LS I cant do anything with. I was going to block it off but decided to add a flapper on that side so if something restricted my intake the LS could open. The flapper is simply a metal plate folded over a pin. The intake tube inlet is right behind the bumper,  so it is protected a little.


[smg id=6991]


[smg id=6988]


[smg id=6989]


[smg id=6986]


[smg id=6990]


fjyeti

Looks good!  I have been thinking about doing something similar.   Do you think there is any noticable differance in performance or mileage?

eXodus

looks nice ! You can never get enough air to the engine.  :)clap

it least shouldn't hurt. The diameter is big enough. I did built a RAM intake the other day, but didn't finish two tanks yet so I can not see a difference yet in mileage.

It feels like the engine is spooling up quicker.

gadgetman

Dont know yet I haven drove it much but it can only help.

Froggy1936

Spooling is for turbines/jets, Engines Rev .  W% Frank
"The Journey is the REWARD !"
Member of 15 years. We will always remember you, Frank.