Search



06 Stripes in progress

06 Stripes in progress
Previous Image | Next Image
Description: If I were to do this again, I would have done the major body area first and then the stripes, but I just couldn't stand looking at those horrible green things any longer and I wanted to see how my new Toreadore Red and Emerald Green stripes would look.
To prep the surface of the entire rig, I washed it thoroughly and light sanded the entire body, by hand, with 500 grit emery, then washed it again.  I used NO primer whatsoever, just regular Rustoleum white for the main body and canned spray enamel for the stripes.  I would recommend using primer under the stripes if you don't use Rustoleum for them as well.  I used a paint brush to go around the trim and a roller to do the main areas.
It took a little less than 4 days, working on it from sun-up to sun-down to complete.  Five years later, the paint is in perfect shape.
Read THIS excellent discusson for more exterior repainting options!
Picture Stats:
Views: 8605
Filesize: 42.76kB
Height: 375 Width: 500
Posted by: Oz at February 10, 2010, 08:28 PM

Image Linking Codes
BB Code
Direct Link
Show Html Link Code

Comments (2)

Oz
Posts:4107
May 14, 2017, 12:08 PM
Yes, I used a roller.  Just a very little bit of thinner will help give a smoother finish.  Still, you can't tell the difference from just 5' away.
Winnebago Warrior 94
Posts:159
May 03, 2017, 12:10 PM
did you do the rustoleum foam roller method ..if you did it turned out great ..I plan on doing the roller method for mine ..and I plan on doing spray paint for the declas that are faded ..I see where you use the foam roller now ..I plan on using  the brush around my decals too


Powered by: SMF Gallery