Previous Image | Next Image | ||||||
Description: Now, the worst of it. Here is that awful, "flaking" so often encountered. If you brush against it, it's like brushing up against a chalk board, but with a zillion little white flakes added. This had to be completely stripped from the body panel seam to the lower edge trim and from the door to the rear of the rig. I used a paint remover wheel on a drill to go this. It only took about 2 hours.
Picture Stats: Views: 7315 Filesize: 24.47kB Height: 375 Width: 500 Posted by: Oz at February 10, 2010, 08:28 PM Image Linking Codes
|