Thunk noise when shifting from forward to reverse

Started by CapnDirk, November 13, 2016, 01:08 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 2
User actions

legomybago

#25
November 16, 2016, 10:15 AM

Theres not enough room/length for a cardan joint. This was a service bulletin after the fact...even the folks who build military equipment didn't see this coming.
Never get crap happy with a slap happy pappy

CapnDirk

#26
November 16, 2016, 01:20 PM
Lego:
They are still there on columbia blvd.  I knew they were a heavy truck outfitter, but did not know they did drivelines.  Another one is Potter Webster, but have not done business with either.


Anyone know if the ujoints are just going to be stock P30 stuff if I should do it myself?
"Anything given sufficient propulsion will fly!  Rule one!  Maintain propulsion"

"I say we nuke the site from orbit.  It's the only way to be sure"

Rickf1985

#27
November 16, 2016, 03:04 PM
Yes and no, There are several sizes of u-joints that were used in the P30 so it is a good idea to measure the joints first so you get the right ones. They will be normal u-joints that are readily available.

CapnDirk

#28
November 16, 2016, 06:13 PM
Thanks Rick.  Do you know if all three are the same?  And I'll just measure one.
"Anything given sufficient propulsion will fly!  Rule one!  Maintain propulsion"

"I say we nuke the site from orbit.  It's the only way to be sure"

Rickf1985

#29
November 16, 2016, 06:39 PM
They "Should be" W%

CapnDirk

#30
November 16, 2016, 07:53 PM
 :D  Like that fuel line that's metric on one end and SAE on the other!
"Anything given sufficient propulsion will fly!  Rule one!  Maintain propulsion"

"I say we nuke the site from orbit.  It's the only way to be sure"

Rickf1985

#31
November 16, 2016, 08:32 PM
Yep, just like that. Wait till you start working on the motor, you will have all of your SAE AND Metric tools out.
Print
Go Up Pages 1 2
User actions