Trying to figure out what sewer hose to get for my 1985 minnie winnie.

Started by Weblamer, January 15, 2014, 10:48 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Weblamer

Hello.

I recently inherited a 1985 minnie winnie from my aunt. However, somewhere along the way the sewer hose has been lost.

I am trying to buy one online (for cheap) however I am not sure what size/type connector I am supposed to get for it. Seems to be several different kinds.

Can anyone help me out? I would hate to order one only to find out it does not fit.

Below is a pic of the port on the camper.





Weblamer


legomybago

I can't see the pic (my computer), but yes they are standard I believe... I like to also have a 90* fitting at opposite end of the hose going into the waste dump drain.
Never get crap happy with a slap happy pappy

M & J

M & J

tiinytina

That looks to be a standard bayonet fitting Valterra.  Most hoses will fit into the standard square bumper that most RV's have (not all)... Mine is just a total flex hose. one end has the female Valterra on to connect to the RV the other is just a cut end to stuff down into the dumpstation access hole.. (all RV stores carry these)  I also purchased a smaller one that is flex but compresses and stays compressed down, one end has the female fitting but the other has a 90 on the end and I can use it with one of those blue honey wagons when needed.... that one I store in the bucket we use to fill and flush out the toilet/black tank. 
Tina
Hi from Gone to the Dawgs! 1987 Tiffin Allegro in Deale MD. CW Rocks!!!

Weblamer


Oz

Let us know what you get so others who may have the same question will know too.  See... even though you're new to vintage RVs, you're already helping others.  Hey, we were ALL new to RVs at one time or another.
:)
1969 D22, 2 x 1974 D24 Indians, 1977 27' Itasca

DaveVA78Chieftain

If you want to see what one looks like, Walmart carries them in the automotive RV section.

Dave
[move][/move]


Weblamer


M & J

M & J

DaveVA78Chieftain

That's surprising, especially in Florida.  Would be part of the automotive area.
[move][/move]


ClydesdaleKevin

If the valve and port was white, then you'd have a problem finding the right fittings.  Since its black ABS, it should be a standard fitting you can find in Walmart or any RV supplier.

Kev
Kev and Patti, the furry kids, our 1981 Ford F-100 Custom tow vehicle, and our 1995 Itasca Suncruiser Diesel Pusher.

Weblamer

I wanted to add that I went to walmart today, and sure enough there was a tiny RV section in the back with the inlet hose. I had already orderded mine online for a few bucks more. Ah well.


D:oH!