Where to find 6-port solenoid fuel selector valve?

[BrianB]

I've read this thread (http://www.classicwinnebagos.com/forum/index.php?topic=8966.0) and several others here and elsewhere. Looking for this style selector valve (6 port, solenoid-operated, not motorized).

Looks like AC Delco 467513 is what I need, but no one sells/makes this style anymore?

Is there a thread somewhere that I didn't find where someone has described how they swapped over? I do not really want to change the switches in the dash or run a bunch of new wires all the way back underneath.

Seems like I could use the 5-wire if I had an ignition positive wire back there and use a DPDT relay. But if someone has already done this conversion, would like to hear about it.

Thanks!

[BrianB]

Or has anyone done the swap using 2 of the 3-port valves (1 for supply, 1 for return)? I wonder what the current draw is for the coil in the solenoid and if doubling the load would be a problem.

[joev]

Try here http://www.davesdiscountautoparts.com/searchitem.epc?sku=467513

[RANGERRICK]

I have a new valve for 30.00.

[BrianB]

I have a new valve for 30.00.

I'm interested. Tried to PM you but it says your mailbox is full.

[joev]

you can try thttp://www.rockauto.com/en/catalog/chevrolet,1986,p30,5.7l+350cid+v8,1059230,fuel/air,fuel+tank+selector+valve,6276?a=Referer+www.bing.com+URL+%2Fen%2Fcatalog%2Fhis one too

[BrianB]

you can try http://www.rockauto.com/en/catalog/chevrolet,1986,p30,5.7l+350cid+v8,1059230,fuel/air,fuel+tank+selector+valve,6276?a=Referer+www.bing.com+URL+%2Fen%2Fcatalog%2F this one too

That is the motorized one that requires rewiring all the way back to the dash with a custom switch. Exactly what I am hoping to avoid.

[RANGERRICK]

Deleted some emails.The valve i have has the single electrical connection and 6 fuel ports.

[Ike]

I want it if he doesn't. I will send you a p.m.

[RANGERRICK]

Sorry,sold to Brian B
Bill

[DaveVA78Chieftain]

Ike - You will either have to rewire to the 6 port motrized version or use two 3 port valves in parallel

[Ike]

Ike - You will either have to rewire to the 6 port motrized version or use two 3 port valves in parallel

I was hoping to find a 6 port 1 wire so I wouldn't have to go motorized. The two 3 port in parallel sound interesting. At this time we don't use the other tank however I would like to at some point. I was wanting to get an original since I have been underneath fixing gas lines by the original one several times.

[DaveVA78Chieftain]

Then you may need to do a google search everyday until a hidden gem pops up