Need 1988 Suncruiser Wiper arms

[CapnDirk]

in working on getting my wipers working I found that the arms have gotten pretty sloppy.  The arm is basically two pieces.  A cast part that bolts to the spindle, and the arm is attached to it with a single rivet sideways (the lean it out pivot point).  The rivet and holes are so worn there is a time delay on direction change.  So, is there a source for wiper arms for a 88 Suncruiser?


I think I need to change blades to.   IT looks like someone put 24s on a 28.


Thanks

[DaveVA78Chieftain]

Wiper parts are listed in the 88 P-Common Parts book; Electrical section  (PDF page 22) Winnebago Part Numbers.

[CapnDirk]

Thanks Dave, no joy on that part number

[Froggy1936]

Find the correct alignment and weld/braze them together !Frank