Need fuel pump for a Kohler Generator Model 3.5CM21

Started by NEWATTHIS, February 17, 2011, 02:12 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

NEWATTHIS

Hello fellow RVers,
wanted to ask where I can find a good used furl pump for my 1979 Winn Tasca Kohler Generator engine model=K181qs, model 3.5cm21RV, 120v, 29 amp per terminal, 6-(HZ) (2 wires)
This all the info I have i??. If anyone can help, I'd surely appreciate it deeply. I hope some one knows what I am trying to find, ha. thanks to ya all. have happy trails. Maybe see you son on the highways.
    Many Regards, Gary  :)
Dysfunctional Vet, Gary

fgutie35

If you can't find the OEM part, you can always get a universal low pressure electric fuel pump at Autozone or any auto parts store.

DaveVA78Chieftain

The service manual for the 3.5CM21 model of generator indicates it used a 12VDC electric fuel pump with 2.75 - 3.5 PSI output.  You should be able to select from one of the following and adapt the mounting:
http://www.pegasusautoracing.com/group.asp?GroupID=FACET

The same pumps will cost about twice as much from a RV dealer.  You will discover they typically repackage the facet pumps and jack the prices.  Sometinmes they change the wires and mounts a little but it is still a facet pump.  Even has the original facet number still on it.

Dave
[move][/move]


tiinytina

http://www.perr.com

precise Engine repair

his prices are good, and knows lots too.

Tina
Hi from Gone to the Dawgs! 1987 Tiffin Allegro in Deale MD. CW Rocks!!!

jkilbert

another good place for small engine parts is

manufacturers supply

www.mfgsupply.com
Greetings from the steel buckle of the rust belt