Pricing for early engine mounts # 2264675

Started by tmackx, April 20, 2011, 02:02 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

tmackx

I am needing a pair of engine mounts for my 72 Brave.  I have seen them for as high as $110 on ebay and other websites for a pair.  I have also seen the later mounts that only use one stud on either side for as low as $5 each.  Are the three studded earlier mounts that rare or should I keep looking?  I stopped in at napa today and they could only show me a picture of the later two studded mount.  I even threw out the 1969 W300 option but they seemed lost.  Any suggestions would be appreciated. 

DaveVA78Chieftain

NAPA Online says 2264675 crosses to their Balkamp P/N BK6021115
($9.99) and is available via online order.

Dodge Parts book says the P/N 2264675 insulator is used on 69-73 318/413//440

This is what P/N 2264675 looks like



On ebay, the balkamp P/N has a different format of 602-1115
http://cgi.ebay.com/ebaymotors/NOS-Balkamp-Left-Motor-Mount-602-1115-1968-Dodge-Truck-_W0QQcmdZViewItemQQhashZitem2eb4903448QQitemZ200597845064QQptZVintageQ5fCarQ5fTruckQ5fPartsQ5fAccessories

NOS parts places are priced excessively high because of original restoration desires.  Aftermarket is what you want.

This should work for you as long as you do not need the metal brakets

Dave
[move][/move]


tmackx

Thanks for the info.  When to napa and they had them in the city so I got them this afternoon.  $10 each.   

DaveVA78Chieftain

Something to remember:
NAPA has the best online P/N interchange system that I have seen.
I only wish they had not changed to the new online user interface because it's one of the worst systems I have ever seen.  You have to have a extremly high amount of patience to use it (10 times slower than the old one).   The old system was far better than the one they just migrated to.

Dave
[move][/move]


LJ-TJ

See, see,see I told ya. N.A.P.A. has never let us down when we've been out on the road. Even the Franchisees of that store bend over back words to help you out and get you back out on the road. Lauren and I can't say enough good things about N.A.P.A.  :)clap

burt6666

Quote from: DaveVA78Chieftain on April 20, 2011, 09:54 PM
NAPA Online says 2264675 crosses to their Balkamp P/N BK6021115
($9.99) and is available via online order.

Dodge Parts book says the P/N 2264675 insulator is used on 69-73 318/413//440

This is what P/N 2264675 looks like



On ebay, the balkamp P/N has a different format of 602-1115
http://cgi.ebay.com/ebaymotors/NOS-Balkamp-Left-Motor-Mount-602-1115-1968-Dodge-Truck-_W0QQcmdZViewItemQQhashZitem2eb4903448QQitemZ200597845064QQptZVintageQ5fCarQ5fTruckQ5fPartsQ5fAccessories

NOS parts places are priced excessively high because of original restoration desires.  Aftermarket is what you want.

This should work for you as long as you do not need the metal brakets

Dave

Would these work on a 1973 indian with a 413?

DaveVA78Chieftain

If you look at my post I said:
Dodge Parts book says the P/N 2264675 insulator is used on 69-73 318/413//440

Same mount is used for the M300, RM300, RM350, M375, or RM400 chassis.  Actually, that insulator is used up through at least 79 on all chassis models.

Dave
[move][/move]


burt6666