1985 p30 fuel pump (electric) where is it?

[Jupp318]

Thanks Dave,
I was being a bit dense. 1/16" Interference fit gives me 1/4" & 5/16" hoses coming off the top of the tank, with as you say 5/8" for the Vent & 1 3/4" for the filler hose.  The 1 3/4" is becoming difficult to get over here as it would seem that the manufacturers are making 1 1/2" & 2".  I don't know how long the P30 Chassis was made for but I think it would be wise for anyone who hasn't replaced these hoses yet to consider getting them replaced over the winter.  I was lucky in that I had LPG to fall back on.  When it started leaking I switched over to Petrol & put my foot down to burn what was left in the tank as quickly as possible (which didn't take long!!!).

[DaveVA78Chieftain]

Chevy produced the P30 chassis from 1974 to 1999 so that is a lot of P30's!     Workhorse purchased the P30 line and continued the P30 for a couple of years beyond that until they started the W20/W22 series.  Sadly, Workhorse (now owned by Navistar) dropped producing a gas chassis a couple of years ago when GM stopped producing the 8.1L truck engine.  For new RV's, the Ford F-53 is about the only Class A gas chassis left in the market.

Dave