Repair kit for fuel pressure regulator?

[lngfish]

When I changed my bonnet assembly I got from Advance. Anyway I made up a JIG that is a Tee with a gauge in Tee and then it runs out to small hoses to fit where the Main Fuel Filter is behind the Propane Tank. I installed it and set regulator. Then removed it and put Filter back in place and kept as handy to set regulator in future.

[BrandonMc]

Rick,


Did you ever figure out if the holley kit needed the red low pressure spring, or the high pressure spring?


I ended up taking mine apart to realize that the spring was entirely missing!! Would you believe this could be the likely fuel delivery, or vapor locking issue I experience hauling up hills?

[Rickf1985]

The low pressure spring is the one you want. In your case if it is easy or at least feasible to get to the regulator and remove it then I would replace the whole unit, They are not that much. Is it even possible to move the adjuster on there?