Search



The Micro adjuster HYCO valve going through the preheater

The Micro adjuster HYCO valve going through the preheater
Previous Image | Next Image
Description: Here I hooked the HEATER tubing (aluminum fuel line) to the output line going to the Carb inlet. Re adjustment IS necessary as the vapor temp is approx. 280 degrees at the carb. This will not cause it to BLOW UP, Flashover is 900 degrees so it's safe. Also the engine temp goes down a little due to a more complete burn IN the combustion chamber & NOT in the exhaust pipes. Smells better too.
Picture Stats:
Views: 3544
Filesize: 34.68kB
Height: 400 Width: 378
Posted by: GONMAD at July 17, 2013, 02:37 AM

Image Linking Codes
BB Code
Direct Link
Show Html Link Code

Comments (0)



Powered by: SMF Gallery