Brake rotor sources

[The_Handier_Man1]

From: rshaw500  (Original Message)
Sent: 7/23/2002 4:22 PM

   PLEASE IF ANY ONE OUT THERE CAN HELP US LET ME KNOW ASAP. WE HAVE A 1979 WINNABAGO BRAVE,440 ENGINE ON A DODGE CHASSY, THE RIGHT SIDE ROTOR IS SHOT CHUNKS JUST BROKE OFF . WE LIVE IN UPSTATE NEW YORK AND RIGHT KNOW WE ARE IN NEW JERSEY NO ONE KNOWS WHERE WE CAN LOCATE A ROTOR, THE  DODGE COMPANY ORDER ONE THEY TOLD US THAT THE ROTOR AND HUB COM TOGETHER KNOW, BUT IT WAS THE WRONG ONE WAS TO BIG. AND ALL THE OTHER PARTS PLACES WE HAVE BEEN TOO SEEM TO BE SHOWING US THE SAME ROTOR AND ITS WRONG FOR OUR MOTOR HOME... EVEN CALLED JUNKYARS AND NO HELP THERE EITHER...THE PLACE WE BOUGHT IT NO HELP FROM THEM EITHER...WE LIVE 4 HOURS AWAY FROM WHERE WE ARE RIGHT KNOW AND CAN NOT DRIVE THE MOTOR HOME ...BACK TO WHERE WE LIVE SO WE ARE STUCK..HOPE SOMEONE CAN HELP....
THAN YOU
RSHAW



From: Cousin Eddie
Sent: 7/23/2002 6:35 PM

Have you tried ?

http://www.azrvinc.com

Look under accessories and scroll down to the bottom of the page. They advertise Dodge rotors. They are pretty high, but you have to have them.



From: chip
Sent: 7/23/2002 7:00 PM

don't know if these numbers are posted and if they are still good. 310-513-2060 or 617-268-8116. good luck, chip.Û



From: Dave1210
Sent: 7/23/2002 7:50 PM

There is a guy on Ebay parting out 75. Don't know if they are the same parts but you can email him at Sc4400@cs.com.



From: bemmer
Sent: 7/23/2002 9:24 PM

TRY www.alretta.com



From: rshaw500  (Original Message)
Sent: 8/5/2002 2:53 AM

I am having a problem finding a rotor for my 1979 winnebago brave. Every
time they look one up it comes back the wrong part. Now they tell me that
bendix took over and that the rotor comes pressed to the hub and you must
buy the whole part. I ordered what the man at the dodge place told me would
be the right part for $416.00 and again it came back as the wrong part. I
have a M40 series dodge chassis with the front axle rating at 4,900 pounds.
Is there anyone out there that can find the right part for me?
Rick



From: jmark
Sent: 8/5/2002 1:59 PM

Hi,
Try www.alretta.com



From: rshaw500
Sent: 8/6/2002 3:03 AM

If the F17 and F19 were ford chassis and the D22 was a dodge chassis then
what is my 79 brave if it is listed as a M40?
I am simply going nuts trying to find a brake rotor and all of the silly
answers I am getting from so called parts specialists at the parts stores and
the dodge dealers. When I needed a throttle cable they looked it right up
and ordered it for me at a cost of 100 dollars but now they cant seem to find
out what rotor I am using.
I tried NAPA, who are supposed to be the know all end all but they are lost
also.
Should I go to a truck dealership and try to look up the part for a large
dodge truck?
I am driving on the old bad rotor right now and need to find a new one very
soon.
Rick



From: Harold
Sent: 8/6/2002 11:06 PM

HAL HERE. HAVE A 79 BRAVE ALSO. THE FRAME IS A 2 TON . I FOUND THE BRAKE PARTS THAT I NEEDED AT THE DODGE DEALERSHIP.