Making custom rims

Started by Arberg0, November 29, 2008, 09:49 AM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Arberg0

From: Sandytoes22  (Original Message) Sent: 4/3/2005 7:37 PM

am searching for custom motorhome rims to make my Winnie  beach ready (in other words, Off Road Ready.)  the company I was going to get them from , Boxer Safewide Wheels, went out of business and I have been unable to locate them locally  .This company may have opened up under another name  ; so if anyone has that information too, as well as how I can obtain 8 lug dodge chassis  rims for the front of my '72 Brave  I would be so grateful.
 


 

From: chip Sent: 4/3/2005 10:12 PM
stockton will make them for you.
some guys used to take the u.s. wheel 16.5x9.75 and run them backwards[inside out]. this should give you sufficient offset but check the lugs frequently.
late model ford dually rims[till1999] should clear the drum and tie rod end . with that rim i have run 265X16 tires with no problem.


If it's true that our species is alone in the universe, then I'd have to say that the universe aimed rather low and settled for very little.
George Carlin (1937 - 2008)

"The Tree of Liberty must be refreshed from time to time with the blood of patriots and tyrants." --Thomas Jefferson