Adding Transmission Temperature Gauge Probe in an A727?

Started by LJ-TJ, July 07, 2013, 06:31 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

LJ-TJ

Where would or how would you put a temp probe in a 727 transmission for a auto meter trans temp gauge. Hm?

cncsparky

Aftermarket kits that I've seen either tee off the tranny cooler line or place the sensor through a drilled and tapped hole in the tranny pan.
-Tom

ibdilbert01

I'd stick it in the rear test port.   Just replace the 1/8th npt plug with a temperature sensor. 




Constipated People Don't Give a crap!

LJ-TJ

Good one. Thanks Mate. See you at the Winnebago Rally in 26 Days.

Wantawinnie

I've got one in the tranny pan and one in the hot line which is the one attached to the front fitting. I have one gauge and use a toggle switch to change back and forth.