Source for 318 Exhaust Manifold

[The_Handier_Man1]

From: davidfordtg  (Original Message)
Sent: 12/12/2004 12:50 PM

Does any one have a line on an exhaust manifold (passenger side) for my 71’ M300 318-3?



From: DaveVa78Chieftain
Sent: 12/12/2004 10:06 PM

http://www.bishopengine.com/pages/manproduct.asp?type=Chrysler_Manifolds

and

http://stevensparts.com/AMC%20EXHAUST%20MANIFOLDS.htm

Dave



From: denison
Sent: 12/13/2004 6:47 AM

    Also you can search at ebay.  I searched just now using  -  318  exhaust  manifold  - and found several, most of which were for the cars I imagine.  1aaautomotive had a set for trucks, might have been the same as yours.  If you dont see a part identical to yours, then ask the seller a question - as to whether he can get you a set for the 318-3.  Some of the sellers harvest high-value resources from the salvage yards. 
     I have the 413-1 engine, and from watching ebay, now have a spare set of manifolds.  One cost $60, another cost $120. 



From: HeavyHaulTrucker
Sent: 12/13/2004 9:41 PM

Just a note regarding the availability of exhause manifolds.  When I stopped by Texas Dodge here in Amarillo, I checked into the availability of manifolds for the 440-3.

After determining that they were not available from Dodge anymore, he did a nationwide inventory search to see if any dealers had any old ones collecting dust in their parts rooms.  Nada -- nothing.  There are no Dodge 440 truck exhaust manifolds available from Dodge dealers in the United States.

Brenda (TrixTret) told me the last time I talked to here that she had been able to get the passenger side one from her local Dodge dealer... I think she got the last one!

John